Displaying 151 - 160 results of 502 for ""
Published: 1992
Category:
Unsealed pavements
,
Maintenance
,
Specifications
| Audiences:
Road traffic engineers & consultants,
Roading contractors
This specification sets out the requirements for repairs to the pavement structure in unsealed roads, where a digout is required.
Published: 1995
Category:
Construction
,
Maintenance
,
Specifications
| Audiences:
Road traffic engineers & consultants,
Roading contractors
Q/3 Normal QA level contract specification covers the quality assurance requirements for contracts which have been assessed at the normal quality assurance level.
Published: 2000
Category:
Application
,
Road marking
,
Specifications
| Audiences:
Road traffic engineers & consultants,
Roading contractors
This specification and guidance notes apply to the reflectorised and non-reflectorised marking of sealed and paved road surfaces in paint, thermoplastic and other types of road marking materials.
Published: January 2011
Category:
Road safety
,
Planning, design, funding, building, maintenance of the transport network
,
Guidance for specialists
| Audiences:
Road controlling authorities,
Road traffic engineers & consultants,
Roading contractors
Traffic notes provide traffic safety information and guidance which may apply to all types of roads.
Published: 1981
Category:
Monitoring
,
Network
,
Specifications
| Audiences:
Road traffic engineers & consultants,
Roading contractors
This procedure defines standard nomenclature and methods of measurement for describing the location of test points on state highways.
Published: March 2015
Category:
Activity management
,
CAPTIF
,
Research programme
,
Research & reports
| Audiences:
Road traffic engineers & consultants,
Roading contractors
The objectives of this study were to investigate the relationship between permeability of chipseals, waterfilm thickness, basecourse moisture sensitivity, heavy traffic volumes, and premature pavement failure following construction through the use of…
Published: 2014
Category:
State highways
,
Forms
| Audiences:
Road controlling authorities,
Road traffic engineers & consultants,
Roading contractors
Disposal valuers instruction template
Published: 13 January 2011
Category:
Surfacings & asphalt
,
Technical memoranda
| Audiences:
Road traffic engineers & consultants,
Roading contractors
The procedure for assessing bitumens for acceptance by the penetration test shows the calculations used to set the acceptance limits shown in table 1 of M1 notes:2010.
Published: 2014
Category:
State highways
,
Forms
| Audiences:
Road controlling authorities,
Road traffic engineers & consultants,
Roading contractors
Lifestyle property valuation report template
Published: 1985
Category:
Materials
,
Chipsealing
,
Specifications
| Audiences:
Road traffic engineers & consultants,
Roading contractors
This specification and guidance notes are to be appended to P/4 Resealing and shall apply where natural rubber latex is to be added to the bituminous binder for resealing purposes.