Displaying 181 - 190 results of 638 for ""
Published: October 2011
Category:
State highway forecasts
,
Corporate publications
| Audience:
Road traffic engineers & consultants
This plan describes the services that our state highway system provides now and in the future, how we intend to maintain, renew, operate and improve the network, and how we propose to fund the work that is needed.
Published: August 2000
Category:
Asset management
,
Manuals
| Audience:
Road traffic engineers & consultants
An outline of best practice procedures to be followed in providing state highway asset management services.
Published: 1 October 1998
Category:
Structures (bridges & culverts)
,
Manuals
| Audiences:
Road traffic engineers & consultants,
Roading contractors
This manual sets out the required screening procedure to be used for the initial stage, which identifies and ranks those bridges that are considered by the screening consultant to justify subsequent detailed assessment of their earthquake resistance.
Published: July 1997
Category:
Vegetation
,
Maintenance
,
Specifications
| Audiences:
Road traffic engineers & consultants,
Roading contractors
This specification sets out the requirements and standards for the control of roadside vegetation on state highways.
Published: December 2011
Category:
Road safety hardware and practice
,
Technical memoranda
| Audience:
Road traffic engineers & consultants
To advise on the recommended practice for using low strength concrete around guardrail posts that are installed in hard surfaces such as concrete footpaths.
Published: 1995
Category:
Unsealed pavements
,
Maintenance
,
Specifications
| Audiences:
Road traffic engineers & consultants,
Roading contractors
This specification guidance notes sets out the requirements and standards of work to maintain the maintenance aggregate of an unsealed road carriageway including running surface, shoulders, feather edges and surface water channels.
Published: 1992
Category:
Unsealed pavements
,
Maintenance
,
Specifications
| Audiences:
Road traffic engineers & consultants,
Roading contractors
This specification sets out the requirements for repairs to the pavement structure in unsealed roads, where a digout is required.
Published: June 2012
Category:
Research & reports
| Audience:
Road traffic engineers & consultants
This report presents and discusses the results of a research project aimed at examining the relationships between road safety and road roughness parameters routinely used for road asset management purposes so that appropriate corrective actions can b…
Published: September 2019
Category:
Guidance for specialists
| Audience:
Road traffic engineers & consultants
This document provides guidance on thresholds required by transportation models to be fit for purpose.
Published: 1995
Category:
Construction
,
Maintenance
,
Specifications
| Audiences:
Road traffic engineers & consultants,
Roading contractors
Q/3 Normal QA level contract specification covers the quality assurance requirements for contracts which have been assessed at the normal quality assurance level.
