When putting together your business case, there are technical requirements that may be relevant to your project that will need to be considered and included.
To ensure you are completing all steps correctly when you are building your business case, follow the table below.
You will notice that more is required as you get deeper into the business case process. Not all of these steps are relevant for all business cases but it will give you a good overview of what you may need to consider.
These tables outline what these requirements are and where you can go to find the relevant information.
| Business case phase | Technical requirements | Information |
| Indicative business case | Undertake a safety review | NZTA Transport Services process reviewed by subject matter experts (SMEs) |
|
Design exceptions review
|
NZTA Transport Services process reviewed by SMEs | |
| Detailed business case | Road safety audit - concept audit | Road safety audit procedures |
| Design - review of compliance with guidelines - exception report | ||
| Pre-implementation | Road safety audit procedure - detailed design | Road safety audit procedures |
| Safe system compliant roadside / median | Safety and design | |
| Note: guidelines relating to the process for consideration of the issues raised by the RSA process are contained in the Project management manual SM011 | SM011 | |
| Design - review of compliance with guidelines. Review exception report and amend as required |
Austroads guide to road design parts 3, 4 & 6(external link) |
|
| Implementation |
Follow the Road safety audit procedure - detailed design Safe system compliant roadside/median Note: guidelines relating to the process for consideration of the issues raised by the RSA process are contained in the Project management manual SM011 |
|
|
Review of compliance with guidelines Review exception report and amend as required |
For further information contact trafficandsafety@nzta.govt.nz.
