Resources

WITHDRAWN - This specification and associated notes covered the design, fabrication and testing of tubular section, galvanised steel friction fit jointed street light columns of the ground planted, flange mounted and frangible base type.

This specification replaces M/19 which is now long out of date.

This specification and guidance notes set out requirements for marking materials which have a long service life and which are typically applied at thicknesses of about 0.9 mm or more.

This specification describes technical, testing and certification requirements for mechanically controlled road marking applicators and associated equipment to be used for the application of long-life materials in compliance with NZTA P22 Specificati…

This specification and guidance notes sets out the requirements for the removal of roadside litter.

This specification ahd guidance notes apply to the purchase of calcium oxide or calcium hydroxide for use in soil stabilisation.

This P49 specification outlines the requirements for implementation of the NZ Transport Agency Waka Kotahi Sustainability Rating Scheme Policy.

The T31 laboratory test method is used to quantify the adhesion between a bituminous binder dosed with adhesion agent and a mineral aggregate.

P04 Specification for resealing sets out a client-prescribed method for the construction of a chip seal on a pavement that has an existing surfacing.

M13 specification for adhesion agents (version 2) sets out the requirements for the testing and use of adhesion (anti-stripping) agents in cutback bitumen used for chip sealing.