Displaying 31 - 40 results of 143 for ""
Published: 1994
Category:
Materials
,
Lighting
,
Specifications
| Audience:
Road traffic engineers & consultants
WITHDRAWN - This specification and associated notes covered the design, fabrication and testing of tubular section, galvanised steel friction fit jointed street light columns of the ground planted, flange mounted and frangible base type.
Published: 1995
Category:
Construction
,
Maintenance
,
Specifications
| Audiences:
Road traffic engineers & consultants,
Roading contractors
Q/3 Normal QA level contract specification covers the quality assurance requirements for contracts which have been assessed at the normal quality assurance level.
Published: 2000
Category:
Application
,
Road marking
,
Specifications
| Audiences:
Road traffic engineers & consultants,
Roading contractors
This specification and guidance notes apply to the reflectorised and non-reflectorised marking of sealed and paved road surfaces in paint, thermoplastic and other types of road marking materials.
Published: 1981
Category:
Monitoring
,
Network
,
Specifications
| Audiences:
Road traffic engineers & consultants,
Roading contractors
This procedure defines standard nomenclature and methods of measurement for describing the location of test points on state highways.
Published: 1985
Category:
Materials
,
Chipsealing
,
Specifications
| Audiences:
Road traffic engineers & consultants,
Roading contractors
This specification and guidance notes are to be appended to P/4 Resealing and shall apply where natural rubber latex is to be added to the bituminous binder for resealing purposes.
Published: June 2022
Category:
Materials
,
Road marking
,
Specifications
| Audiences:
Road traffic engineers & consultants,
Roading contractors
This specification (M07) and accompanying notes cover paints and other materials used for delineation on road surfaces.
Published: 2008
Category:
Application
,
Road marking
,
Specifications
| Audiences:
Road traffic engineers & consultants,
Roading contractors
This specification describes technical, testing and certification requirements for mechanically controlled road marking paint applicators to be used for work in compliance with P/12 Specification for pavement marking and P/22 Specification for reflec…
Published: 1992
Category:
Depressions
,
Maintenance
,
Specifications
| Audiences:
Road traffic engineers & consultants,
Roading contractors
This specification and guidance notes applies to the correction of settlement deformation, including depressions and wheel path rutting and settlement due to surface openings in surfaced roads.
Published: 1995
Category:
Pre-surfacing repairs
,
Maintenance
,
Specifications
| Audiences:
Road traffic engineers & consultants,
Roading contractors
This specification and guidance notes set out the requirements for crack sealing, repair of scabbing, stripping and bleeding, and the second coat sealing of pavement repairs.
Published: 1981
Category:
Construction
,
Pavement & surfacing
,
Specifications
| Audiences:
Road traffic engineers & consultants,
Roading contractors
Specification and guidance notes for the supply of aggregate by weight.