Resources

This specification and guidance notes set out requirements for marking materials which have a long service life and which are typically applied at thicknesses of about 0.9 mm or more.

This specification describes technical, testing and certification requirements for mechanically controlled road marking applicators and associated equipment to be used for the application of long-life materials in compliance with NZTA P22 Specificati…

This specification and guidance notes sets out the requirements for the removal of roadside litter.

This specification ahd guidance notes apply to the purchase of calcium oxide or calcium hydroxide for use in soil stabilisation.

This specification and guidance notes shall apply to the construction of unbound granular pavement layers.

This standard covers the construction of the concrete weigh pit and fabrication and assembly of the swing arm barrier.

This specification sets out the requirements for repairs to the pavement structure in flexible pavements, where a digout is required.

The M10 dense graded asphalt specification (version 6) and notes (version 4) cover dense graded asphaltic concrete for roads and related applications.

Specification and guidance notes for the erection and maintenance of traffic signs, chevrons, markers and sight rails.

This specification sets out requirements for edge marker posts (EMPs) as used in the delineation of state highways in accordance with the Traffic Control Devices Manual, Parts 4 and 5.