Displaying 21 - 30 results of 37 for ""
Published: May 2006
Category:
Surfacings & asphalt
,
Technical memoranda
| Audiences:
Road controlling authorities,
Road traffic engineers & consultants
This report identifies possible methods and constraints on the use of waste tyre rubber in asphalt in New Zealand.
Published: November 2014
Category:
Road safety hardware and practice
,
Technical memoranda
| Audience:
Road traffic engineers & consultants
This technical memorandum provides advice on the recommended practice for the design and installation of transitions between wire rope safety barriers (WRSB) and semi-rigid and rigid barrier systems. The barrier configurations in the memo are generic…
Published: August 2021
Category:
Structures (bridges, culverts & geotechnical)
,
Technical memoranda
| Audience:
Road traffic engineers & consultants
This memorandum provides information for practitioners on the calculation of road superelevation appropriate for a vehicle speed and curve radius.
Published: November 2012
Category:
Road safety hardware and practice
,
Technical memoranda
| Audience:
Road traffic engineers & consultants
To advise of the preferred method of selecting road safety barrier containment (test) level, calculating the length of need (LON) appropriate to that test level and highlighting circumstances under which the LON may be reduced.
Published: 6 April 2023
Category:
General circulars
,
Technical memoranda
| Audience:
Local & regional government
General circulars are used by Waka Kotahi NZ Transport Agency to directly advise road controlling authorities and regional councils about relevant policy or programme management updates, or to communicate recent Board decisions.
Published: 28 June 2006
Category:
Approvals
,
Technical memoranda
| Audiences:
Road traffic engineers & consultants,
Roading contractors
Approval of 6mm OCLYTE short stub TM manufactured by CSP Pacific including conditions for use.
Published: December 2011
Category:
Road safety hardware and practice
,
Technical memoranda
| Audience:
Road traffic engineers & consultants
To advise on the required practice for installation of slip base sign fixings to ensure safe operation and compliance with NZ Transport Agency P24 specification and RMSA Compliance standard for traffic signs (2008).
Published: December 2011
Category:
Road safety hardware and practice
,
Technical memoranda
| Audience:
Road traffic engineers & consultants
To advise on the recommended practice for the nesting of non-proprietary semi-rigid barrier systems (W-Beam and Thrie-Beam).
Published: August 2016
Category:
Technical memoranda
| Audience:
Heavy vehicle operators
This guide covers a considerable number of faults and situations that are dealt with by police who hold a certificate to carry out level 3 and level 5 inspections, CVIU vehicle safety officers and NZ Transport Agency transport officers.
Published: December 2011
Category:
Road safety hardware and practice
,
Technical memoranda
| Audience:
Road traffic engineers & consultants
To advise on the recommended practice for the lapping of semi-rigid barrier systems (W-beam and thrie-beam).
