Resources

Displaying 371 - 380 results of 507 for ""

Traversable and mountable grates for precast concrete headwalls

Published:
Category: Structures (bridges, culverts & geotechnical) , Technical memoranda | Audiences: Road traffic engineers & consultants, Roading contractors

This memo provides details of grates that are acceptable in principle for use with precast concrete headwalls on state highways to protect the headwalls and vehicle occupants from the effects of vehicle impact.

Signs and markings to designate paths for pedestrians and cyclists

Published:
Category: Walking & cycling , Guidance for specialists | Audiences: Road controlling authorities, Road traffic engineers & consultants, Roading contractors

Road controlling authorities are required to use signs and/or markings to designate a shared path for use by pedestrians and cyclists.

#19-09 Update to NZTA M1-A specification for performance-graded asphalt binder

Published:
Category: Technical advice note | Audiences: Road traffic engineers & consultants, Roading contractors

This notice advises that the new performance-graded asphalt binder specification is available to be used for all future asphaltic concrete works.

Contractor health and safety expectations: guidance for supply chain partners

Published:
Category: Health and safety , Specifications | Audiences: Road controlling authorities, Road traffic engineers & consultants, Roading contractors

As a person conducting a business or undertaking (PCBU) Waka Kotahi NZ Transport Agency has a duty to ensure the health, safety and wellbeing of all its supply partners, so far as reasonably practicable.

Standard safety intervention toolkit

Published:
Category: Manuals , Safety management systems | Audiences: Road controlling authorities, Road traffic engineers & consultants, Roading contractors

The Standard Safety Intervention toolkit provides guidance for road safety practitioners on the effectiveness and value-for-money cost range of proven safety interventions to reduce the number of people killed and seriously injured on Aotearoa roads.

#19-01 Revision of the Code of Practice for Temporary Traffic Management (CoPTTM)

Published:
Category: Technical advice note | Audiences: Road traffic engineers & consultants, Roading contractors

This notice advises that there has been a general update for the Code of Practice for Temporary Traffic Management Manual, which will come into effect from February 2019 and must be applied to all work from then.

Texture by the sand circle method measurements

Published:
Category: Skid resistance & texture , Surfacing , Specifications | Audiences: Road traffic engineers & consultants, Roading contractors

This test procedure covers the determination of the average texture depth of a paved surface using sand to give the volume of voids.

Research Report 618 Trialling best value delineation treatments for rural roads

Published:
Category: Activity management , Research programme , Research & reports | Audiences: General, Roading contractors

Providing a safe, comfortable, cost-effective visual environment to help drivers navigate rural roads requires a better understanding of the strengths and limitations of different delineation devices, materials and treatment configurations.

2015/16 Draft State Highway Plan

Published:
Category: Planning, design, funding, building, maintenance of the transport network , Guidance for specialists | Audience: Roading contractors

The purpose of this document is to communicate our state highway annual work programme.

#16-07 Update to Z19 State highway environmental and social responsibility standard and guidance

Published:
Category: Technical advice note | Audiences: Road controlling authorities, Road traffic engineers & consultants, Roading contractors

The purpose of the Z19 State highway environmental and social responsibility standard is to explain to Transport Agency project and maintenance contract managers and their teams how and when to implement the Transport Agency’s environmental and socia…