Displaying 161 - 170 results of 507 for ""
Published: May 2014
Category:
Corporate publications
| Audience:
Roading contractors
The purpose of this document is to communicate our state highway annual work programme.
Published: 1987
Category:
Materials
,
Chipsealing
,
Specifications
| Audiences:
Road traffic engineers & consultants,
Roading contractors
This test method covers the procedure for sampling and for determination of percentage fines, average least dimension (ALD), average greatest dimension (AGD), distribution of least dimensions, and incidence of broken faces in grades 1–4 stone sealing…
Published: 2 March 2020
Category:
Project & contract management
,
Manuals
| Audiences:
Road traffic engineers & consultants,
Roading contractors
A manual for use by Waka Kotahi NZ Transport Agency when preparing state highway tender documents for maintenance contracts.
Published: November 2009
Category:
Signs & markings (permanent & temporary)
,
Manuals
| Audiences:
Road traffic engineers & consultants,
Roading contractors
Index to all the signs and markings (permanent and temporary) manuals and relevant specifications.
Published: August 2019
Category:
Noise & vibration
,
Planning, design, funding, building, maintenance of the transport network
,
Guidance for specialists
| Audience:
Roading contractors
Waka Kotahi NZ Transport Agency recognises that noise and vibration associated with road construction and maintenance can be intrusive and disturbing, especially at night.
Published: 1 October 1998
Category:
Structures (bridges & culverts)
,
Manuals
| Audiences:
Road traffic engineers & consultants,
Roading contractors
This manual sets out the required screening procedure to be used for the initial stage, which identifies and ranks those bridges that are considered by the screening consultant to justify subsequent detailed assessment of their earthquake resistance.
Published: July 1997
Category:
Vegetation
,
Maintenance
,
Specifications
| Audiences:
Road traffic engineers & consultants,
Roading contractors
This specification sets out the requirements and standards for the control of roadside vegetation on state highways.
Published: 1995
Category:
Unsealed pavements
,
Maintenance
,
Specifications
| Audiences:
Road traffic engineers & consultants,
Roading contractors
This specification guidance notes sets out the requirements and standards of work to maintain the maintenance aggregate of an unsealed road carriageway including running surface, shoulders, feather edges and surface water channels.
Published: 1992
Category:
Unsealed pavements
,
Maintenance
,
Specifications
| Audiences:
Road traffic engineers & consultants,
Roading contractors
This specification sets out the requirements for repairs to the pavement structure in unsealed roads, where a digout is required.
Published: 1995
Category:
Construction
,
Maintenance
,
Specifications
| Audiences:
Road traffic engineers & consultants,
Roading contractors
Q/3 Normal QA level contract specification covers the quality assurance requirements for contracts which have been assessed at the normal quality assurance level.
