Resources

Index to all the signs and markings (permanent and temporary) manuals and relevant specifications.

This manual sets out the required screening procedure to be used for the initial stage, which identifies and ranks those bridges that are considered by the screening consultant to justify subsequent detailed assessment of their earthquake resistance.

This specification and guidance notes are to be appended to P/4 Resealing and shall apply where natural rubber latex is to be added to the bituminous binder for resealing purposes.

This specification (M07) and accompanying notes cover paints and other materials used for delineation on road surfaces.

This specification describes technical, testing and certification requirements for mechanically controlled road marking paint applicators to be used for work in compliance with P/12 Specification for pavement marking and P/22 Specification for reflec…

This specification covers the supply of steel and fabrication of all components for W-section bridge guardrail, excluding posts, post bolts and terminal fittings.

This specification sets out the requirements for the supply, cartage and laying of maintenance aggregate for unsealed roads, including preparation of the surface prior to laying.

This specification and guidance notes set out the requirements and maintenance standard for the repair of potholes in unsealed roads.

These notes provide guidance for the engineer to aid in their decision to reject or accept a material proposed for use a basecourse or sub-bases used on state highways and other roadways constructed in accordance with TNZ B/3 performance based specif…