Displaying 81 - 90 results of 644 for ""
Published: 2006
Category:
Digouts
,
Maintenance
,
Specifications
,
| Audiences:
Road traffic engineers & consultants,
Roading contractors,
This specification, HM12 Digouts, replaces specification TNZ C4 Specification for digout repairs in flexible pavements.
Published: 2006
Category:
Operations
,
Maintenance
,
Specifications
,
| Audiences:
Road traffic engineers & consultants,
Roading contractors,
This specification replaces specification TNZ C15 Specification for removal of surface detritus.
Published: 2006
Category:
Monitoring
,
Network
,
Specifications
,
| Audiences:
Road traffic engineers & consultants,
Roading contractors,
This specification sets out the requirements for the selection of sites and the installation of inductive loops at traffic monitoring sites located on state highways.
Published: 1991
Category:
Lighting
,
Maintenance
,
Specifications
,
| Audiences:
Road traffic engineers & consultants,
Roading contractors,
This specification and guidance notes set out the requirements for the maintenance of highway lighting, including belisha beacons, floodlighting, and illuminated signs.
Published: 1991
Category:
Barriers
,
Maintenance
,
Specifications
,
| Audiences:
Road traffic engineers & consultants,
Roading contractors,
Guidance notes to the Specification for maintenance of guardrails and median barriers.
Published: December 2011
Category:
Road safety hardware and practice
,
Technical memoranda
,
| Audience:
Road traffic engineers & consultants,
To advise on the required practice for installation and maintenance of M19 3 bolt shear base lighting columns to ensure safe operation.
Published: June 2025
Category:
Specifications
,
| Audiences:
Road controlling authorities,
Road traffic engineers & consultants,
Roading contractors,
NZTA Standardised design solutions for use on State Highway Roads of National Significance.
Published: 22 December 2005
Category:
Skid resistance & surface texture
,
Technical memoranda
,
| Audiences:
Road traffic engineers & consultants,
Roading contractors,
This memo advises macrotexture requirements for low speed areas and supersedes the two earlier asset management memos.
Published: 31 May 2017
Category:
Road safety hardware and practice
,
Technical memoranda
,
| Audience:
Road traffic engineers & consultants,
This standard drawing shows details of the accepted grading profile for guardrail terminals accepted in NZ Transport Agency specification M23.
Published: 1994
Category:
Materials
,
Lighting
,
Specifications
,
| Audience:
Road traffic engineers & consultants,
WITHDRAWN - This specification and associated notes covered the design, fabrication and testing of tubular section, galvanised steel friction fit jointed street light columns of the ground planted, flange mounted and frangible base type.
