Displaying 61 - 70 results of 641 for ""
Published: 2006
Category:
Unsealed pavements
,
Maintenance
,
Specifications
| Audiences:
Road traffic engineers & consultants,
Roading contractors
HM23 Unsealed pavements replaces specifications TNZ C11, C12, C13 and C14.
Published: 2006
Category:
Service covers
,
Maintenance
,
Specifications
| Audiences:
Road traffic engineers & consultants,
Roading contractors
This specification, HM15 Service covers, replaces specification TNZ C8 Specification for adjusting service covers.
Published: 2006
Category:
Potholes
,
Maintenance
,
Specifications
| Audiences:
Road traffic engineers & consultants,
Roading contractors
This specification sets out the requirements for the repair of potholes in bituminous surfaced roads and bridge decks.
Published: 2006
Category:
Operations
,
Maintenance
,
Specifications
| Audiences:
Road traffic engineers & consultants,
Roading contractors
This specification replaces specification TNZ C9 Specification for emergency work.
Published: 2006
Category:
Edgebreak
,
Maintenance
,
Specifications
| Audiences:
Road traffic engineers & consultants,
Roading contractors
This specification, HM14 Edgebreak, replaces specification TNZ C7 Repair of edge break.
Published: 2006
Category:
Drainage
,
Maintenance
,
Specifications
| Audiences:
Road traffic engineers & consultants,
Roading contractors
This specification replaces specification TNZ C16 Specification for maintenance of stormwater structures.
Published: 2006
Category:
Digouts
,
Maintenance
,
Specifications
| Audiences:
Road traffic engineers & consultants,
Roading contractors
This specification, HM12 Digouts, replaces specification TNZ C4 Specification for digout repairs in flexible pavements.
Published: 2006
Category:
Operations
,
Maintenance
,
Specifications
| Audiences:
Road traffic engineers & consultants,
Roading contractors
This specification replaces specification TNZ C15 Specification for removal of surface detritus.
Published: 2006
Category:
Monitoring
,
Network
,
Specifications
| Audiences:
Road traffic engineers & consultants,
Roading contractors
This specification sets out the requirements for the selection of sites and the installation of inductive loops at traffic monitoring sites located on state highways.
Published: 1991
Category:
Lighting
,
Maintenance
,
Specifications
| Audiences:
Road traffic engineers & consultants,
Roading contractors
This specification and guidance notes set out the requirements for the maintenance of highway lighting, including belisha beacons, floodlighting, and illuminated signs.
