Displaying 531 - 540 results of 638 for ""
Published: 2009
Category:
Materials
,
Road marking
,
Specifications
| Audiences:
Road traffic engineers & consultants,
Roading contractors
This specification describes the procedure for determining the heavy metal content in glass beads intended for use in pavement marking materials.
Published: 2003
Category:
Construction
,
Asphalt
,
Specifications
| Audiences:
Road traffic engineers & consultants,
Roading contractors
This method describes the use of the standpipe permeameter to assess the permeability of compacted hot mix asphalt pavement surfacings.
Published: October 2009
Category:
Walking & cycling
,
Planning, design, funding, building, maintenance of the transport network
,
Guidance for specialists
| Audiences:
Road traffic engineers & consultants,
Walkers & cyclists
The Pedestrian planning and design guide published in 2009, was New Zealand's first comprehensive official guide to planning and design for walking.
Published: 2003
Category:
Skid resistance & texture
,
Surfacing
,
Specifications
| Audiences:
Road traffic engineers & consultants,
Roading contractors
This specification and guidance notes set out requirements for improving the macrotexture (texture) of a pavement surface using high-pressure water or grooving treatments.
Published: January 2014
Category:
Road safety hardware and practice
,
Technical memoranda
| Audience:
Road traffic engineers & consultants
To advise on the recommended practice for the design and installation of a curved W-Beam guardrail terminal for radii between 5m and 15m.
Published: October 2013
Category:
Road safety hardware and practice
,
Technical memoranda
| Audience:
Road traffic engineers & consultants
This standard drawing shows details of the accepted curved terminal end terminal treatment as described in Technical memorandum TM2008.
Published: November 2004
Category:
Crash analysis
,
Research & reports
| Audience:
Road traffic engineers & consultants
The Land Transport Safety Authority, Transit New Zealand and local authorities are partners in the Crash Reduction Study Programme (formerly known as the Joint Crash Investigation Programme) in New Zealand.
Published: 1977
Category:
Geometric design
,
Manuals
| Audiences:
Road traffic engineers & consultants,
Roading contractors
A design guide for highways with a positive collection system which was developed by the Roading Division of Ministry of Works.
Published: September 2011
Category:
Manuals
,
Safety management systems
| Audience:
Road traffic engineers & consultants
The High-risk rural road guide was developed to assist road controlling authorities in targeting road safety improvements on the highest risk sections of New Zealand’s rural roads (those with a posted speed limit of 80km/h or more) by using best valu…
Published: 2009
Category:
Application
,
Road marking
,
Specifications
| Audiences:
Road traffic engineers & consultants,
Roading contractors
This specification and accompanying guidance notes set out the requirements for high performance road markings for road safety.
