Displaying 411 - 420 results of 635 for ""
Published: 2000
Category:
Construction
,
Pavement & surfacing
,
Specifications
| Audiences:
Road traffic engineers & consultants,
Roading contractors
These notes provide guidance for the engineer to aid in their decision to reject or accept a material proposed for use a basecourse or sub-bases used on state highways and other roadways constructed in accordance with TNZ B/3 performance based specif…
Published: December 2023
Category:
Structures
,
Maintenance
,
Specifications
| Audiences:
Road controlling authorities,
Road traffic engineers & consultants
This specification defines the key requirements of the main roles and responsibilities for the delivery of safe, effective tunnel management on the state highway network.
Published: 6 August 2019
Category:
Technical advice note
| Audiences:
Road traffic engineers & consultants,
Roading contractors
This technical advice note outlines interim requirements for the use of mechanical reinforcement couplers and anchors, subsequent to the publication of the Bridge manual 3rd edition amendment 3.
Published: September 1996
Category:
Crash analysis
,
Research & reports
| Audience:
Road traffic engineers & consultants
A crash analysis of chevron treatments, sometimes together with other treatments, at bends.
Published: 24 October 2008
Category:
Structures (bridges, culverts & geotechnical)
,
Technical memoranda
| Audiences:
Road traffic engineers & consultants,
Roading contractors
This memo provides details of grates that are acceptable in principle for use with precast concrete headwalls on state highways to protect the headwalls and vehicle occupants from the effects of vehicle impact.
Published: 1 April 2019
Category:
Walking & cycling
,
Guidance for specialists
| Audiences:
Road controlling authorities,
Road traffic engineers & consultants,
Roading contractors
Road controlling authorities are required to use signs and/or markings to designate a shared path for use by pedestrians and cyclists.
Published: 10 June 2020
Category:
Construction
,
Pavement & surfacing
,
Specifications
| Audiences:
General,
Road traffic engineers & consultants,
Roading contractors
This ethylene glycol accelerated weathering test method (NZTA T20) has been developed to assess the durability of aggregates for pavement construction.
Published: 24 June 2019
Category:
Technical advice note
| Audiences:
Road traffic engineers & consultants,
Roading contractors
This notice advises that the new performance-graded asphalt binder specification is available to be used for all future asphaltic concrete works.
Published: June 2020
Category:
Health and safety
,
Specifications
| Audiences:
Road controlling authorities,
Road traffic engineers & consultants,
Roading contractors
As a person conducting a business or undertaking (PCBU) Waka Kotahi NZ Transport Agency has a duty to ensure the health, safety and wellbeing of all its supply partners, so far as reasonably practicable.
Published: 20 October 2020
Category:
Signs
,
Maintenance
,
Specifications
| Audiences:
Road traffic engineers & consultants,
Roading contractors
This specification sets out performance requirements for traffic sign manufacturers wishing to design and manufacture, and contractors wishing to install and maintain permanent traffic signs in New Zealand.