Displaying 281 - 290 results of 645 for ""
Published: October 2011
Category:
State highway forecasts
,
Corporate publications
| Audience:
Road traffic engineers & consultants
This plan describes the services that our state highway system provides now and in the future, how we intend to maintain, renew, operate and improve the network, and how we propose to fund the work that is needed.
Published: August 2000
Category:
Asset management
,
Manuals
| Audience:
Road traffic engineers & consultants
An outline of best practice procedures to be followed in providing state highway asset management services.
Published: November 2012
Category:
Road safety hardware and practice
,
Technical memoranda
| Audience:
Road traffic engineers & consultants
To advise of the preferred method of selecting road safety barrier containment (test) level, calculating the length of need (LON) appropriate to that test level and highlighting circumstances under which the LON may be reduced.
Published: October 2012
Category:
Construction
,
Chipsealing
,
Specifications
| Audiences:
Road traffic engineers & consultants,
Roading contractors
This specification and guidance notes set out the performance requirements for: single coat reseals using sealing chip with an average dimension greater than 5.5mm; multilayer seals using sealing chips in the range of grade 2 to grade 6, as defined i…
Published: June 1977
Category:
Construction
,
Pavement & surfacing
,
Specifications
| Audiences:
Road traffic engineers & consultants,
Roading contractors
This test procedure covers the determination of the rebound deflection of a pavement under a standard wheel load and tyre pressure, with or without temperature measurements.
Published: June 2006
Category:
Research & reports
| Audience:
Road traffic engineers & consultants
In 2006, the Board of Transit NZ (now the NZ Transport Agency) approved the passing and overtaking (PO) policy.
Published: July 2024
Category:
Construction
,
Pavement & surfacing
,
Specifications
| Audiences:
Road traffic engineers & consultants,
Roading contractors
M04 Specification for basecourse aggregate and accompanying Notes sets out requirements for basecourse aggregate for use on state highways and other heavily trafficked roadways.
Published: 1 July 2009
Category:
Austroads guides
,
Manuals
| Audiences:
General,
Local & regional government,
Road controlling authorities,
Road traffic engineers & consultants,
Roading contractors
The NZ Transport Agency will be formally integrating the new guides into their business from the 1st August 2010.
Published: December 2024
Category:
Planning, design, funding, building, maintenance of the transport network
,
Guidance for specialists
| Audience:
Road traffic engineers & consultants
This guide is for the use of road controlling authorities, designers and installers when designing and installing audio tactile pavement marking.
Published: 2007
Category:
Materials
,
Road marking
,
Specifications
| Audiences:
Road traffic engineers & consultants,
Roading contractors
This specification and guidance notes apply only to audio tactile profiled (ATP) road markings.
