Resources

The M01 bitumen specification and notes set out the requirements for bitumen used for pavements in New Zealand.

This specification sets out the requirements for the removal and disposal from the surface of the carriageway and drainage channels of detritus as requires removal.

This specification applies to the marking of sealed and paved road surfaces in paint and thermoplastic road marking materials that are reflectorised by means of an application of glass beads.

This report identifies possible methods and constraints on the use of waste tyre rubber in asphalt in New Zealand.

This specification and guidance notes apply to the installation of raised pavement markers.

The M12 Specification for the Design, Manufacture, Installation and Maintenance of Raised Pavement Markers, NZTA M12-S, and associated documents M12-F (Field Test for Raised Pavement Markers, M12-C (Certificate and Worksheet Templates for Raised Pave…

A visual check sheet system, and report form, for road controlling authority and contractor field staff to assess common maintenance issues.

Transit has adopted a two level concept where contracts involving road construction, road maintenance, and structures activities are assigned a quality assurance level High (TQS1) or Normal (TQS2).

Transit has adopted a two level concept where contracts involving road construction, road maintenance, and structures activities are assigned a quality assurance level High (TQS1) or Normal (TQS2).