Resources

Displaying 231 - 240 results of 638 for ""

Road network trends

Published:
Category: Statistics & surveys | Audience: Road traffic engineers & consultants

The Road Network Trends Wizard allows you to: look at annual statistics, works completed, condition, use and costs - for local roads and State Highways look at trends or comparisons at a national / regional / local level obtain a copy of the raw data…

#16-14 Stormwater specification for state highways

Published:
Category: Technical advice note | Audiences: Road controlling authorities, Road traffic engineers & consultants, Roading contractors

The P46 State highway stormwater specification sets out the design and construction stormwater requirements for all state highway improvement projects, however a construction specification will still be necessary for construction requirements.

Repair of surface openings and minor surface levelling

Published:
Category: Depressions , Maintenance , Specifications | Audiences: Road traffic engineers & consultants, Roading contractors

This specification and guidance notes applies to the correction of settlement deformation, including depressions and wheel path rutting and settlement due to surface openings in surfaced roads.

Repair of surface defects

Published:
Category: Pre-surfacing repairs , Maintenance , Specifications | Audiences: Road traffic engineers & consultants, Roading contractors

This specification and guidance notes set out the requirements for crack sealing, repair of scabbing, stripping and bleeding, and the second coat sealing of pavement repairs.

Supply of aggregate by weight

Published:
Category: Construction , Pavement & surfacing , Specifications | Audiences: Road traffic engineers & consultants, Roading contractors

Specification and guidance notes for the supply of aggregate by weight.

Sub-base aggregate

Published:
Category: Construction , Pavement & surfacing , Specifications | Audiences: Road controlling authorities, Road traffic engineers & consultants

Guidance notes provided as there is no standard TNZ M/3 Specification for sub-base aggregate.