Resources

This specification applies to the marking of sealed and paved road surfaces in paint and thermoplastic road marking materials that are reflectorised by means of an application of glass beads.

This specification and guidance notes apply to the reflectorised and non-reflectorised marking of sealed and paved road surfaces in paint, thermoplastic and other types of road marking materials.

This specification (M07) and accompanying notes cover paints and other materials used for delineation on road surfaces.

This specification describes technical, testing and certification requirements for mechanically controlled road marking paint applicators to be used for work in compliance with P/12 Specification for pavement marking and P/22 Specification for reflec…

This specification describes the procedure for determining the retroreflectivity of road marking material.

This specification describes the procedure for determining the heavy metal content in glass beads intended for use in pavement marking materials.

This specification and accompanying guidance notes set out the requirements for high performance road markings for road safety.

This specification and guidance notes set out requirements for marking materials which have a long service life and which are typically applied at thicknesses of about 0.9 mm or more.

This specification describes technical, testing and certification requirements for mechanically controlled road marking applicators and associated equipment to be used for the application of long-life materials in compliance with NZTA P22 Specificati…

This specification and guidance notes apply only to audio tactile profiled (ATP) road markings.