Displaying 1 - 9 results of 9 for ""
Published: October 2009
Category:
Structures (bridges & culverts)
,
Manuals
| Audience:
General
The BDS was used for maintaining up-to-date structural information for all structures on the state highway network that are sensitive to overweight vehicle loads, and was used by OPermit to assist with the evaluation of overweight permit applications…
Published: 1 October 1998
Category:
Structures (bridges & culverts)
,
Manuals
| Audiences:
Road traffic engineers & consultants,
Roading contractors
This manual sets out the required screening procedure to be used for the initial stage, which identifies and ranks those bridges that are considered by the screening consultant to justify subsequent detailed assessment of their earthquake resistance.
Published: February 2014
Category:
Structures (bridges & culverts)
,
Manuals
| Audience:
Road traffic engineers & consultants
This document provides a summary of information to assist the bridge designer with the specification of a cost effective performance based corrosion protection system, taking into account future maintenance requirements, by using the net present valu…
Published: November 2022
Category:
Structures (bridges & culverts)
,
Manuals
| Audiences:
Road traffic engineers & consultants,
Roading contractors
This NZTA S6 policy document sets out the requirements for the inspection of bridges and other significant structures on the state highway network including the structural aspects of tunnels.
Published: May 2013
Category:
Structures (bridges & culverts)
,
Manuals
| Audiences:
Road traffic engineers & consultants,
Roading contractors
This Bridge manual sets out the criteria for the design and evaluation of bridges, culverts, stock underpasses and subways, the design of earthworks and retaining structures.
Published: July 2001
Category:
Structures (bridges & culverts)
,
Manuals
| Audience:
Road traffic engineers & consultants
Guidelines for best practice bridge inspection and maintenance.
Published: May 2016
Category:
Structures (bridges & culverts)
,
Manuals
| Audiences:
Road traffic engineers & consultants,
Roading contractors
The Highway structures design guide sets out Waka Kotahi NZ Transport Agency’s design requirements for all permanent highway structures on the state highway network.
Published: April 2006
Category:
Structures (bridges & culverts)
,
Manuals
| Audience:
General
The Bridge descriptive system is used for maintaining up-to-date structural information for all structures on the state highway network that are sensitive to overweight vehicle loads, and is used by OPermit to assist with the evaluation of overweight…
Published: December 2013
Category:
Structures (bridges & culverts)
,
Manuals
| Audience:
Road controlling authorities
This NZ Transport Agency guide to road tunnels is a supplement to the Austroads Guide to road tunnels.
