Displaying 1 - 10 results of 20 for ""
Published: 30 April 2014
Category:
Road safety hardware and practice
,
Technical memoranda
| Audience:
Road traffic engineers & consultants
To advise on the recommended practice for the design and installation of a ground beam for the support of semi-rigid road safety barrier systems. This design applies to public domain systems only.
Published: May 2013
Category:
Road safety hardware and practice
,
Technical memoranda
| Audience:
Road controlling authorities
This technical memorandum provides advice on the recommended practice for the mitigation of hazards associated with tubular handrails commonly installed for pedestrian/cyclist protection adjacent to roadways and on structures.
Published: December 2011
Category:
Road safety hardware and practice
,
Technical memoranda
| Audience:
Road traffic engineers & consultants
To advise on the required practice for installation and maintenance of M19 3 bolt shear base lighting columns to ensure safe operation.
Published: 31 May 2017
Category:
Road safety hardware and practice
,
Technical memoranda
| Audience:
Road traffic engineers & consultants
This standard drawing shows details of the accepted grading profile for guardrail terminals accepted in NZ Transport Agency specification M23.
Published: March 2013
Category:
Road safety hardware and practice
,
Technical memoranda
| Audience:
Road traffic engineers & consultants
The launches of the Safer Journey’s initiative and the Decade of Action for Road Safety have brought the way we design for safety into focus.
Published: January 2014
Category:
Road safety hardware and practice
,
Technical memoranda
| Audience:
Road traffic engineers & consultants
To advise on the recommended practice for the design and installation of a curved W-Beam guardrail terminal for radii between 5m and 15m.
Published: October 2013
Category:
Road safety hardware and practice
,
Technical memoranda
| Audience:
Road traffic engineers & consultants
This standard drawing shows details of the accepted curved terminal end terminal treatment as described in Technical memorandum TM2008.
Published: December 2011
Category:
Road safety hardware and practice
,
Technical memoranda
| Audience:
Road traffic engineers & consultants
To advise on the recommended practice for the design and installation of a buried in backslope end treatment.
Published: October 2012
Category:
Road safety hardware and practice
,
Technical memoranda
| Audience:
Road traffic engineers & consultants
To provide a list of frequently asked questions with answers in regard to road safety barrier systems, terminals and crash cushions.
Published: September 2015
Category:
Road safety hardware and practice
,
Technical memoranda
| Audience:
Road traffic engineers & consultants
The Transport Agency temporary concrete road safety barrier design (TCB-1) is a metricated variant of the Oregon State Department of Transport (ORDoT) F-shape “Precast Concrete Barrier Pin and Loop Assembly” (RD500).
