Displaying 1 - 3 results of 3 for ""
Published: 13 January 2011
Category:
Surfacings & asphalt
,
Technical memoranda
| Audiences:
Road traffic engineers & consultants,
Roading contractors
The procedure for assessing bitumens for acceptance by the penetration test shows the calculations used to set the acceptance limits shown in table 1 of M1 notes:2010.
Published: 19 November 2009
Category:
Surfacings & asphalt
,
Technical memoranda
| Audiences:
Road traffic engineers & consultants,
Roading contractors
Highways and Network Operations Technical Memorandum No. TM6003 containing advice on the use of bitumen test results, both bitumen quality control records and verification testing.
Published: May 2006
Category:
Surfacings & asphalt
,
Technical memoranda
| Audiences:
Road controlling authorities,
Road traffic engineers & consultants
This report identifies possible methods and constraints on the use of waste tyre rubber in asphalt in New Zealand.
