Resources

Q/3 Normal QA level contract specification covers the quality assurance requirements for contracts which have been assessed at the normal quality assurance level.

This specification and guidance notes apply to the reflectorised and non-reflectorised marking of sealed and paved road surfaces in paint, thermoplastic and other types of road marking materials.

This procedure defines standard nomenclature and methods of measurement for describing the location of test points on state highways.

This specification and guidance notes are to be appended to P/4 Resealing and shall apply where natural rubber latex is to be added to the bituminous binder for resealing purposes.

This specification (M07) and accompanying notes cover paints and other materials used for delineation on road surfaces.

This specification describes technical, testing and certification requirements for mechanically controlled road marking paint applicators to be used for work in compliance with P/12 Specification for pavement marking and P/22 Specification for reflec…

This specification and guidance notes applies to the correction of settlement deformation, including depressions and wheel path rutting and settlement due to surface openings in surfaced roads.

This specification and guidance notes set out the requirements for crack sealing, repair of scabbing, stripping and bleeding, and the second coat sealing of pavement repairs.

Specification and guidance notes for the supply of aggregate by weight.

Guidance notes provided as there is no standard TNZ M/3 Specification for sub-base aggregate.