SH3 New Plymouth to Hāwera and SH3A

Project background

• Proposed safety improvements

  Intersection speed zones  

  • Intersection speed zones improve safety at rural intersections along high-speed roads and can reduce fatal and serious crashes by 69%.  
  • Along with flexible road safety barriers they are part of the Safe System approach, which aims to create a forgiving environment and reduce harm when people make mistakes.  

  Safe System solutions

  Flexible road safety barriers  

  • Flexible road safety barriers save lives and reduce the number of people seriously injured. They give you a second chance, so a simple mistake doesn’t cost a life.   
  • When they’re installed on the side or in the centre of the road, they can reduce the number of people killed.   
  • When you hit a flexible barrier, the steel cables flex, slowing your vehicle and keeping it upright. They absorb the impact and help protect you and your passengers. 

  Close

• Speed review

  Any changes to speed limits on this section of SH3 will be appropriate for the road after any infrastructure improvements have been made.

  Close

• Project timeline

  Timings	Key milestones	Status
  2018	New Plymouth to Hāwera SH3 safety improvements first considered	Completed
  Early 2021	Feasibility study for safety improvements - New Plymouth to Egmont Village	Completed
  Mid 2021	Safety improvements investigations and speaking with those that could be directly affected - New Plymouth to Egmont Village	Completed
  Late 2021	Community consultation on proposed improvements - New Plymouth to Egmont Village	Completed
  Late February 2023	Public consultation starts on the possible installation of an intersection speed zone	Completed
  September 2023	Start of works at Junction Street SH3 intersection, New Plymouth	Completed
  February 2024	Start of median barrier installation at sites between Inglewood and Hāwera	Completed
  July/August 2024	Start to construction of Mangorei Road roundabout

  Close

Project updates

• Works update – June 2024

  We’ve updated our work locations map to show all the safety improvements we’ve completed to date, and what’s coming next.

  

  Work locations during 2024  – June 2024 [PDF, 993 KB]

  Close

• Physical works underway – March 2024

  We are underway with physical works and have a busy programme of safety improvements lined up for 2024 - as shown in our latest works map.

  

  Work locations during 2024  – March 2024 [PDF, 509 KB]

  Please also read our latest newsletter, in the ‘Project updates section above.

  Close

• Project update – October 2023

  Construction is underway, please read our lvatest media release and newsletter (located in the 'Project updates' section above), for more information.

  Close

• Project update – August 2023

  We are about to begin safety improvement works on State Highway 3 near New Plymouth, as part of the New Plymouth to Hāwera Safety Improvements project. 

  Over the last few years, we have consulted on safety improvements between New Plymouth and Egmont Village including the proposed intersection speed zone at Junction Street, New Plymouth. 

  We have heard clearly from the community that intersection safety is important, with Junction Street and Mangorei Road regarded as high priorities.  

  Junction Street intersection upgrades 

  In September, we will start upgrades at the SH3 intersection with Junction Street, just south of New Plymouth.

  This work comprises:

  • installation of flexible median barriers north towards New Plymouth and south to the Mangorei Road intersection
  • installation of an intersection speed zone. This will detect when traffic is approaching the highway from Junction Street, or turning right into Junction Street from the highway, and temporarily reduce the local SH3 speed limit to 60kmh
  • when operating, the zone’s two digital signs – located approximately 150m north and south of the Junction Street intersection – will display an enforceable speed limit of 60kmh
  • removal of the southbound passing lane at Junction Street. This 420m passing lane is much shorter than the minimum safe overtaking length of 600m-800m.

  These measures will reduce the risk and severity of crashes and make it safer for people to pull out of or into Junction Street across a high-speed rural road.

  In response to community feedback, drivers will still be able to make right turns out of Junction Street, reducing the likelihood of adding to congestion on the local network.

  Other works 

  Installation of flexible median barriers at sites between Inglewood and Hāwera is scheduled to begin in early 2024.  

  Also in early 2024 we plan to start work on installing a roundabout at the Mangorei Road intersection. 

  The entire New Plymouth to Hāwera project will improve safety over more than 65km of Taranaki highway, through the installation of flexible median barriers and turnaround facilities on SH3 and widening of the centreline on SH3A. All works are subject to property negotiations and consenting.

  The Publications tab showcases our latest posters:

  • The overall New Plymouth to Hāwera project area and upcoming work
  • The Junction St intersection speed zone
  • The Mangorei Road roundabout.

  Publications page(external link)

  Close

• Project update – April 2023

  Consultation on the proposed Intersection Speed Zone at the SH3 intersection with Junction Street ended on Sunday 2 April 2023. Thanks to everyone who provided their feedback. Please watch this page or subscribe to our newsletter for further updates.

  Close

• Project update – February 2023

  We are moving forward with safety improvement plans for State Highway 3 between New Plymouth and Egmont Village and aim to start physical works in the first half of 2023.

  During engagement with key stakeholders and the wider community on our proposals for this 9.75km corridor, we heard clearly that intersection safety is a priority, so we’ve decided to address the intersections at Junction Street and Mangorei Road first.

  As a part of Stage One priority works, public consultation is being held on a proposal for an intersection speed zone to reduce speeds at the SH3 intersection with Junction Street.

  If confirmed following public consultation, the Intersection Speed Zone would detect drivers approaching the highway from Junction St or turning right into Junction St from the highway, and reduce the speed limit temporarily on SH3 to improve safety for all road users.

  When operating, the zone’s two digital signs – located approximately 150m north and south of the Junction St intersection – would display an enforceable speed limit of 60kmh.

  These measures would temporarily slow traffic, making it easier and safer for people to pull out of or into Junction St across a high-speed rural road. This would help take the pressure off and protect people by reducing the risk and severity of crashes.

  The current 100kmh speed limit would continue to apply at all other times.

  Close