Displaying 11 - 20 results of 142 for ""
Published: 1995
Category:
Construction
,
Chipsealing
,
Specifications
| Audiences:
Road controlling authorities,
Road traffic engineers & consultants
The specification and guidance notes for resealing on an existing sealcoat or primed surface.
Published: 19 December 2014
Category:
Construction
,
Pavement & surfacing
,
Specifications
| Audience:
Roading contractors
T15 is an aggregate testing specification, its purpose is to standardise the test conditions used in the repeat load triaxial test.
Published: 1993
Category:
Potholes
,
Maintenance
,
Specifications
| Audiences:
Road traffic engineers & consultants,
Roading contractors
This specification and guidance notes sets out the requirements for the repair of potholes in bituminous surfaced roads and bridge decks.
Published: 2000
Category:
Structures
,
Maintenance
,
Specifications
| Audiences:
Road traffic engineers & consultants,
Roading contractors
Guidance notes setting out the technical requirements for the quality repair of corrosion protection systems, which may be used as a basis for particular specifications.
Published: 1993
Category:
Operations
,
Maintenance
,
Specifications
| Audiences:
Road traffic engineers & consultants,
Roading contractors
This specification sets out the requirements for the removal and disposal from the surface of the carriageway and drainage channels of detritus as requires removal.
Published: 2006
Category:
Application
,
Road marking
,
Specifications
| Audiences:
Road traffic engineers & consultants,
Roading contractors
This specification applies to the marking of sealed and paved road surfaces in paint and thermoplastic road marking materials that are reflectorised by means of an application of glass beads.
Published: 1995
Category:
Materials
,
Delineation
,
Specifications
| Audiences:
Road traffic engineers & consultants,
Roading contractors
This specification and guidance notes apply to the installation of raised pavement markers.
Published: 2011
Category:
Materials
,
Delineation
,
Specifications
| Audience:
Roading contractors
This specification describes technical, testing and certification requirements for temperature controlled raised pavement marker heaters to be used for work with NZ Transport Agency P14 Specification for raised pavement markers installation (P14) and…
Published: February 2023
Category:
Materials
,
Delineation
,
Specifications
| Audiences:
Road traffic engineers & consultants,
Roading contractors
The M12 Specification for the Design, Manufacture, Installation and Maintenance of Raised Pavement Markers, NZTA M12-S, and associated documents M12-F (Field Test for Raised Pavement Markers, M12-C (Certificate and Worksheet Templates for Raised Pave…
Published: May 2008
Category:
Vehicles
,
Specifications
| Audiences:
Certifiers,
Vehicle inspectors & inspecting organisations
These specifications must be met where a vehicle inspector chooses to use a noise meter to assess exhaust noise as part of the WoF inspection.