Displaying 31 - 40 results of 96 for ""
Published: November 2022
Category:
Structures (bridges & culverts)
,
Manuals
| Audiences:
Road traffic engineers & consultants,
Roading contractors
This NZTA S6 policy document sets out the requirements for the inspection of bridges and other significant structures on the state highway network including the structural aspects of tunnels.
Published: September 2014
Category:
Environment & resource planning
,
Manuals
| Audiences:
Local & regional government,
Road controlling authorities,
Road traffic engineers & consultants,
Roading contractors
The guidelines have been developed to assist roading practitioners with the selection and design of erosion and sediment control practices.
Published: April 2014
Category:
Environment & resource planning
,
Manuals
| Audience:
Roading contractors
This guideline has been superseded by the Guideline for preparing an environmental plan, which is available on our Environmental management plans page.
Published: February 2000
Category:
Austroads guides
,
Manuals
| Audience:
Road traffic engineers & consultants
A guideline to good practice for road stabilisation.
Published: August 2007
Category:
Signs & markings (permanent & temporary)
,
Manuals
| Audience:
Road traffic engineers & consultants
Waka Kotahi plan to archive the Manual of Traffic Signs and Road Marking (MOTSAM) after the publication of the Traffic Control Devices Manual Part 4 in early 2024.
Published: 27 October 2021
Category:
Manuals
| Audience:
Road traffic engineers & consultants
Only consultants who are accredited by us may be eligible to deliver Waka Kotahi NZ Transport Agency physical works contracts.
Published: 12 December 2024
Category:
Project & contract management
,
Manuals
| Audiences:
Road traffic engineers & consultants,
Roading contractors
The NZ Transport Agency Waka Kotahi (NZTA) Contract procedures manual contains procedures for procurement.
Published: August 2007
Category:
Manuals
| Audience:
Road traffic engineers & consultants
This appendix supports Transit NZ's policy on passing and overtaking in section 3.4.3 of the PPM.
Published: December 2007
Category:
Signs & markings (permanent & temporary)
,
Manuals
| Audience:
Road controlling authorities
This part of Traffic control devices manual (TCD Manual) describes the legal framework - implications and responsibilities; design considerations and elements; linear and zone parking treatments; and parking furniture, eg meters, vending machines.
Published: June 2009
Category:
Signs & markings (permanent & temporary)
,
Manuals
| Audiences:
Road controlling authorities,
Road traffic engineers & consultants,
Roading contractors
The policy and location requirements for traffic signs and markings applicable to motorways and expressways.
