Resources

The M7 specification sets out the requirements materials must meet to be included on the list of approved roadmarking products for use on state highways.

This notice advises that the new performance-graded asphalt binder specification is available to be used for all future asphaltic concrete works.

The Guide to assessing road traffic noise using NZS 6806 for state highway asset improvement projects  has been updated. 

The P46 State highway stormwater specification sets out the design and construction stormwater requirements for all state highway improvement projects, however a construction specification will still be necessary for construction requirements.

This notice advises that the draft Standard safety intervention toolkit is available to assist project managers to more easily apply the Safe Network Programme funding model.

This note advises of minor changes have been made to the Risk Management Plan template to align it with the new Z/44 minimum standard for Risk Management.

The July 2015 update of CoPTTM is now on the CoPTTM pages of the NZ Transport Agency website.

Updated RTS14 Guidelines for facilities for blind and vision impaired pedestrians

This note is to advise suppliers, specifiers and applicators for structural steelwork and protective coatings that the following are now…

This technical advice note is to advise that amendment 4 to the Waka Kotahi NZ Transport Agency Bridge manual 3rd edition and amendment 1 to the Bridge manual commentary, both published in May 2022, are available on the Waka Kotahi website for downlo…