Resources

This specification sets out the requirements for repairs to the pavement structure in flexible pavements, where a digout is required.

The M10 dense graded asphalt specification (version 6) and notes (version 4) cover dense graded asphaltic concrete for roads and related applications.

This document is an amalgamation of the Ministry of Works and Development (MWD) Civil Division publications CDP 703/A: 1973 Bridge Classification and Deck Grading for Overweight Permits and CDP 704/B: 1974 Assessment of Posting Weight Limits for High…

This specification and guidance notes set out the performance requirements for: single coat reseals using sealing chip with an average dimension greater than 5.5mm; multilayer seals using sealing chips in the range of grade 2 to grade 6, as defined i…

This test procedure covers the determination of the rebound deflection of a pavement under a standard wheel load and tyre pressure, with or without temperature measurements.

This specification and guidance notes set out requirements for basecourse aggregate for use on state highways and other heavily trafficked roadways.

This specification and guidance notes apply only to audio tactile profiled (ATP) road markings.

The Western Ring Route urban and landscape design framework was prepared to provide an overall design direction for State Highway 20 (Maioro Road to Waterview) and State Highway 16 (St Lukes Road to Lincoln Road).

This specification and accompanying notes describe the procedure by which the contractor shall obtain approval for the nominated adhesion agent and dosage rate with each source of sealing chips that is intended for use on sealing work, except where e…