Displaying 1 - 10 results of 96 for ""
Published: 23 October 2024
Category:
Asset management
,
Manuals
| Audience:
Roading contractors
State highway three-year plan instructions manual (SM018) instructs how the plans for investing in state highway maintenance, operations and renewals need to be developed, presented, and reviewed.
Published: March 2023
Category:
Project & contract management
,
Manuals
| Audiences:
Road traffic engineers & consultants,
Roading contractors
A manual for use by consultants when preparing cost estimates.
Published: March 2023
Category:
State highway operations
,
Manuals
| Audience:
Roading contractors
This manual sets out NZ Transport Agency Waka Kotahi powers and policy with regard to state highways.
Published: November 2009
Category:
Signs & markings (permanent & temporary)
,
Manuals
| Audiences:
Road traffic engineers & consultants,
Roading contractors
Index to all the signs and markings (permanent and temporary) manuals and relevant specifications.
Published: 1 October 1998
Category:
Structures (bridges & culverts)
,
Manuals
| Audiences:
Road traffic engineers & consultants,
Roading contractors
This manual sets out the required screening procedure to be used for the initial stage, which identifies and ranks those bridges that are considered by the screening consultant to justify subsequent detailed assessment of their earthquake resistance.
Published: December 2010
Category:
Vehicle inspection requirements manual (VIRM)
,
Manuals
| Audiences:
Certifiers,
Vehicle inspectors & inspecting organisations
This manual is written for vehicle inspectors and specifies the inspection processes and the requirements that vehicles must meet in order to pass a WoF.
Published: October 2009
Category:
Vehicle inspection requirements manual (VIRM)
,
Manuals
| Audiences:
Certifiers,
Vehicle inspectors & inspecting organisations
This manual applies to the entry inspection and certification of new motor vehicles.
Published: November 2011
Category:
Vehicle inspection requirements manual (VIRM)
,
Manuals
| Audience:
Vehicle inspectors & inspecting organisations
The purpose of the manual is to explain the conditions of appointment and the requirements for the border inspection of imported used vehicles that are entering New Zealand.
Published: 1 May 2021
Category:
Manuals
| Audience:
Heavy vehicle operators
Volume 1 of the Vehicle dimensions and mass permitting manual (the VDAM manual) states Waka Kotahi NZ Transport Agency’s policies and standards for issuing overweight, overdimension, HPMV and specialist vehicle permits.
Published:
Category:
Manuals
| Audience:
Heavy vehicle operators
The Vehicle dimensions and mass permitting manual (the VDAM manual) states Waka Kotahi NZ Transport Agency’s policies, standards, processes and procedures for the permitting of vehicles exceeding standard dimension and mass limits.
